How To Fix Videos With Low Dialogue Volume

The characters on screen are talking in a muffled tone, and then you crank up the volume to hear them talking and then all of a sudden there is a loud explosion, gunfire or thunder that almost gives you a mini cardiac arrest.

Most of us can relate to this state of affairs where widely fluctuating or dynamic sound in movies tin get abrasive. This mostly happens when y'all are watching a motion picture with dynamic sound on a Boob tube or laptop with stereo speakers.

Movies have become louder and louder over the years and sometimes their makers deliberately go along the sound furnishings louder than normal to overwhelm their audience. Moreover, picture show audio is designed keeping Cinemas and Environment Audio Dwelling house theater systems in focus, which have separate audio channels for dialogue and background music.

The low dialogue audio is perfectly audible in a properly configured home theater system. But, your Television receiver set up with stereo speakers or your laptop has to downmix the multichannel audio in gild to reduce the result of dynamic sound.

TV sets have Speech mode or some TVs telephone call it Night or Quiet mode, which sometimes fixes the problem. But on your estimator, you lot would take to tweak your media actor's equalizer settings to reduce the impact of dynamic sound effects.

If you are using the VLC media role player and then you can utilize the Compressor characteristic to fix the audio of movies which have loud action and low speech book.

Fixing Low Dialogue Audio using Compressor

Open your movie in the VLC player. Keep the volume to your preferred level.

Get to Tools > Furnishings and Filters.

Fix Low audio or dynamic audio in movies

It will open the Adjustments and Effects window. Select the Sound Effects tab.

Under the Sound Effects tab select the Compressor tab. Click on the Enable checkbox to enable the Compressor setting sliders.

Drag the individual sliders to the values shown in the image below.

Click on Save, later on irresolute the settings and close the VLC histrion. Restart VLC by playing a video.

At present, Compressor would check for sound information exceeding the average or mean range of the sound and would reduce the sound levels exceeding the ready threshold.

The Makeup Gain setting in Compressor would raise the audio level of softer sounds including the oral communication and dialogue to make it more audible.

Here'due south a brief explanation of all the Compressor settings.

The most important settings which are responsible for compressing the dynamic range of the audio are, Threshold, Ratio and Makeup Gain.

RMS/height	RMS and summit are the audio detection modes for the compressor. Keep this value at 0 or 0.ane
Set on	This setting sets the interval of time to activate the compressor. The higher this value longer the compressor would take to respond to loud sounds. It accepts a value betwixt 1ms – 50ms. 50ms is about 1/20th of a second.
Release	The fade out speed of the pinch. The higher the value the longer the sound compression would remain in effect.
Threshold	The minimum decibel levels to trigger the compressor. A lower value ways that the compressor would be more sensitive to louder sounds.
Ratio	The amount of reduction once the decibel level exceeds the set threshold decibel level. The compressor would make reduction in the exceeded decibel level by the given ratio.
Articulatio genus Radius	This setting controls the speed of activation of Ratio. You lot should set information technology to 1 or 0 but it won't make whatsoever perceivable difference.
Makeup Gain	This setting is really used to recoup for the reduction in overall sound due to compression. This raises the audio level of softer sounds or dialogue.

You tin tweak the settings according to your preference, to get the desired sound level. Moreover, You tin can disable the Compressor if y'all want to enjoy the full dynamic sound range of your pic.